| PART |
Description |
Maker |
| JYC0195 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
| JGC0195 |
miniature chip type designed for two-way surface mounting
|
IDEA.lnc.
|
| JYC0128 |
miniature chip type designed for two-way surface mounting
|
IDEA.lnc.
|
| IVYC0128 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
| JYOC0678 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
| IVGC0128 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
| JYGC0118 |
miniature chip type designed for surface mounting and measure approximately 2.5 x 3 mm
|
IDEA.lnc.
|
| JRC0428 |
miniature lens type designed for surface mounting
|
IDEA.lnc.
|
| JYGC0128 |
right-angle bi-color miniature chip type
|
IDEA.lnc.
|
| M50753-PGYS |
Piggyback
The M50753-PGYS is an EPROM mounted-type microcomputer employing a silicon gate CMOS process and was designed for developing programs for single-chip 在M50753 - PGYS是存储器安装型微机采用硅栅CMOS工艺，并负责制定项目设计的单芯片
|
Mitsubishi Electric, Corp.
Mitsubishi Electric Corporation
Mitsubishi Electric Semiconductor
|
| AM29824DM AM29826DM AM29822DM AM29822LMB AM29822DM |
9-Bit D-Type Flip-Flop
Reference Design kit for the iP1206 a 300kHz, 30A Synchronous Buck Converter; A IRDCIP1206-B with Standard Packaging
Intelligent Power Module. Gate Driver IC integrated with a half bridge FredFET Designed for sub 250W Motor Drive applications in a 9-Lead SIP. RDSon of 1.0 Ohm; A IR3101 with Standard Packaging 10位D型触发器
IR1150 Demo Board designed for use in continuous conduction mode boost converter applications for power factor correction and harmonic current reduction.; A IRAC1150-300W with Standard Packaging 10位D型触发器
Octal D-Type Flip-Flop 八路D类触发器
|
Toshiba, Corp.
Electronic Theatre Controls, Inc.
ITT, Corp.
ATM Electronic, Corp.
|
